Juniper certification JN0-696 exam targeted training

There are different ways to achieve the same purpose, and it's determined by what way you choose. A lot of people want to pass Juniper certification JN0-696 exam to let their job and life improve, but people participated in the Juniper certification JN0-696 exam all knew that Juniper certification JN0-696 exam is not very simple. In order to pass Juniper certification JN0-696 exam some people spend a lot of valuable time and effort to prepare, but did not succeed.

If you want to buy Juniper JN0-696 exam information, ITCertKing will provide the best service and the best quality products. Our exam questions have been authorized by the manufacturers and third-party. And has a large number of IT industry professionals and technology experts, based on customer demand, according to the the outline developed a range of products to meet customer needs. Juniper JN0-696 exam certification with the highest standards of professional and technical information, as the knowledge of experts and scholars to study and research purposes. All of the products we provide have a part of the free trial before you buy to ensure that you fit with this set of data.

Exam Code: JN0-696
Exam Name: Juniper (Security Support, Professional (JNCSP-SEC))
One year free update, No help, Full refund!
Total Q&A: 36 Questions and Answers
Last Update: 2014-01-29

Practice what you preach is the beginning of success. Since you have chosen to participate in the demanding IT certification exam. Then you have to pay your actions, and achieve excellent results. ITCertKing's Juniper JN0-696 exam training materials are the best training materials for this exam. With it you will have a key to success. ITCertKing's Juniper JN0-696 exam training materials are absolutely reliable materials. You should believe that you can pass the exam easily , too.

In order to make you confirm the quality of our dumps and let you know whether the dumps suit you, pdf and software version in ITCertKing exam dumps can let you download the free part of our training materials. We will offer free the part of questions and answers for you and you can visit ITCertKing.com to search for and download these certification training materials. You cannot buy the dumps until you experience it so that you can avoid buying ignorantly the exam dumps without fully understanding the quality of questions and answers.

In order to meet the needs of each candidate, the team of IT experts in ITCertKing are using their experience and knowledge to improve the quality of exam training materials constantly. We can guarantee that you can pass the Juniper JN0-696 exam the first time. If you buy the goods of ITCertKing, then you always be able to get newer and more accurate test information. The coverage of the products of ITCertKing is very broad. It can be provide convenient for a lot of candidates who participate in IT certification exam. Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily.

JN0-696 Free Demo Download: http://www.itcertking.com/JN0-696_exam.html

NO.1 You notice that the secondary node of a chassis cluster has become disabled.
What caused this behavior?
A. The fxp0 interface on the secondary device failed.
B. The control link between the devices failed.
C. A reth on the secondary device failed.
D. An IPsec tunnel between the two devices failed.
Answer: D

Juniper   JN0-696 test questions   JN0-696   JN0-696

NO.2 Two SRX Series devices are having problems establishing an IPsec VPN session. One of the
devices has a firewall filter applied to its gateway interface that rejects UDP traffic.
What would resolve the problem?
A. Disable the IKE Phase 1 part of the session establishment.
B. Disable the IKE Phase 2 part of the session establishment.
C. Change the configuration so that session establishment uses TCP .
D. Edit the firewall filter to allow UDP port 500.
Answer: A

Juniper dumps   JN0-696   JN0-696   JN0-696

NO.3 Your SRX Series device has the following configuration:
user@host> show security policies
...
Policy: my-policy, State: enabled, Index: 5, Sequence number: 1
Source addresses: any Destination addresses: any
Applications: snmp
Action: reject
From zone: trust, To zone: untrust
...
When traffic matches my-policy, you want the device to silently drop the traffic; however, you
notice that the device is replying with ICMP unreachable messages instead.
What is causing this behavior?
A. the snmp application
B. the reject action
C. the trust zone
D. the untrust zone
Answer: C

Juniper braindump   JN0-696   JN0-696 exam simulations   JN0-696 dumps

NO.4 Users at a branch office report that they cannot reach an internal Web server. The users
connect through a single SRX Series device to reach the Web server. A security policy has been
configured on the device that allows traffic to flow between interfaces in the Trust zone.
What is causing this problem?
A. The interface on the device that connects to the Web server is not in the Trust zone.
B. The IPsec VPN connection between the users and the Web server is down.
C. There is a host inbound traffic configuration problem.
D. There is an antispam configuration problem.
Answer: C

Juniper   JN0-696 original questions   JN0-696   JN0-696 answers real questions   JN0-696

NO.5 You want to allow remote users using PCs running Windows 7 to access the network using an
IPsec VPN. You implement a route-based hub-and-spoke VPN; however, users report that they are
not able to access the network.
What is causing this problem?
A. The remote clients do not have proper licensing.
B. Hub-and-spoke VPNs cannot be route-based; they must be policy-based.
C. The remote clients' OS is not supported.
D. Hub-and-spoke VPNs do not support remote client access; a dynamic VPN must be implemented
instead.
Answer: B

Juniper certification training   JN0-696 dumps   JN0-696 practice test   JN0-696

NO.6 You are having problems establishing an IPsec tunnel between two SRX Series devices.
What are two explanations for this problem? (Choose two.)
A. proposal mismatch
B. antivirus configuration
C. preshared key mismatch
D. TCP MSS clamping is disabled
Answer: B,D

Juniper   JN0-696 certification training   JN0-696   JN0-696   JN0-696 demo   JN0-696

ITCertKing offer the latest C4090-959 exam material and high-quality 700-501 pdf questions & answers. Our P2090-010 VCE testing engine and 000-587 study guide can help you pass the real exam. High-quality 70-481 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-696_exam.html